Today Pure and clean water becomes a challenge from the city to the village. The increase in the population, the industrial revolution, the limitation of natural water sources and the appropriate lack of care of the wells, ponds and lakes, which is why it becomes difficult to obtain clean water clean water .
Today, in large cities, you will find reverse osmosis systems (RO) in most houses. However, with the installation of RO, it is also necessary to take care of total design solids, that is to say TD for water quality. Water can also be harmful to health due to the deterioration of the balance of TDS.
So let’s talk about the news of need today, what is the scale of purity of water? Will also know that-
How much should TDS of drinking water be?
Expert: Dr Satyendra Kumar Sonkar, Internal Medicine, King George Medical University, Lucknow
Sagar Gaur, expert in water treatment, Kanpur
Question – What is TDS? Answer – Substances dissolved in water that do not appear with eyes and do not separate from the normal filter are called TDS. When the water passes through stones, pipes or other surfaces, these particles are found there.
Question – Why is TDS tested in the water? The answers are examined to check the quality of the water. It affects the three health, taste and quality of water. This shows whether the water is drinking or not. The amount of TDS is more or less, it is harmful for both health.
Question – What is the meaning of the amount of TDS in very low or more water? Answer – The quantity of TDS in water is very low means that water does not contain necessary minerals such as calcium, magnesium and potassium. This can make water delegated or tasteless. Drinking this water for a long time can cause a lack of minerals in the body. While the amount of TDS is very high means that the water is impure. Drinking such water can cause many health problems.
Question – Why is it necessary to correct the amount of TDS in water? Answer – Dr. Satyendra Kumar Sonkar says that water is the second most important thing for our body after oxygen. Water helps to perform each function of the body correctly. About 60 to 70% of our body is in water.
It is therefore necessary to identify contaminated water. More calcium, magnesium increases the pressure on the kidney. This can cause serious problems such as kidney stone and kidney failure. At the same time, blood pressure can be raised due to excess sodium in water. In addition to this, this can also cause digestive problems. Understand this of the graphic below-
Question – According to the World Health Organization, what should be the amount of TDS in the water?
Answer – The World Health Organization (WHO) advises that 1 liter of water should have a TDS level less than 300 mg. According to the Bureau of Indian Standard (BIS), the amount of TDS in a liter of water should be less than 500 mg.
Question – When should be installed at home to purify the water? Answer – People purify water and install it to make it clean and drinkable. In particular, RO should be installed in places where water contains more TD, chemicals and bacteria. It makes water soft hard and eliminates the harmful elements of the water.
If the water TDS is already between 50 and 200 ppm (parts per million), RO is not necessary.
Question – What should be kept in mind when installing RO at home? Answer – It is important to take care of certain things before buying and installing RO, so that pure and drinking water can be found. Understand this of these pointers-
Get a RO filter as a function of the amount of TDS present in the water. TDS Check the RO filter with a professional filter. Come on, change immediately.
Question – How can you check the amount of TDS in the water at home? Answer – You can take the help of a water quality tester to check the purity of water at home and check the quality. It is a device like a thermometer, which has a digital screen. With its help, you can check the TDS level in the water. Follow these steps to check the water quality of the TDS counter.
First, take water in a clean glass. It goes from 250 to 500 rupees.
Question – How many days should RO maintenance? Answer – The expert in water treatment Sagar Gaur says that it is necessary to check the RO machine every 6 months. In addition, its parts should be cleaned from time to time.
According to a report published in the “National Library of Medicine”, 11.5 million people around the world had a renal stone problem in 2019. These cases are increasing each year. Those who do not drink enough water are the most likely to have a renal calculation. …
There are more news …