pass Recently, a woman died due to electric shock in Bijnor district of Uttar Pradesh. The woman was installing an immersion rod to heat the water in her home. Then, suddenly, she was electrocuted, causing her to lose consciousness. He was immediately transported to the nearest health center, where the doctor pronounced him dead.

The use of submerged probes, i.e. water heating probes, increases in winter. It is very cheap compared to the geyser. This is the reason why many people widely use it to heat water on cold days.

Dip rods operate manually. These do not have the auto-cut option. You must therefore be very careful when using it.

So, today in important news we will talk about the precautions to take when heating water with a dip rod. You will also learn that-

When can a dip rod be dangerous? What should you keep in mind when buying a cane?

Expert: Shashikant Upadhyay, power electronics engineer, Ahmedabad

Question: What is a dip rod?

Answer – Dip rod is a heating equipment. It is used to heat water. The dip rod is made of nichrome wire. This wire is curved like a spool. There is plastic insulation on its upper part. While both ends of the coil are connected with a copper tube. This part is immersed in water.

Question: Why is dip rod risky?

Answer – The dip rod operates in manual mode, so there is a high risk of electric shock. However, if electricity is supplied for a long time, it may overheat and explode. Apart from this, plugging the dip rod into the wrong electrical switch is also dangerous. This could cause a short circuit.

Question: What things should you keep in mind when purchasing a dip rod?

Answer: Nowadays, many locally manufactured immersion rods are available in the market. This type of dip rod has poor electrical wiring. Additionally, prescribed safety standards are not taken into account. Their price is also low, which is why most people buy them.

But this is not good from a security point of view. Their use can be dangerous. Therefore, if you are planning to buy a dip rod during this winter season, keep a few things in mind.

See it in the graph below-

Let us understand these above points in detail.

Buy only after seeing the ISI brand

If you are purchasing a new immersion rod, look for the ISI mark certified by the Bureau of Indian Standards (BIS). The ISI brand is a guarantee of good quality. There is less risk of ISI certified rods being damaged quickly.

check the rated power

Before purchasing a diving rod, its power should be checked. The power rating determines how quickly the rod can heat the water. Power is measured in watts. The higher the wattage of the rod, the faster it will heat the water.

Discover the manufacturing quality of the upper

The build quality of the dip rod should be good. Its steel rods must be strong and durable. At the same time, if the covering of the rod, i.e. the insulation, is plastic, it must be strong.

Show brand and customer reviews

Always purchase dip rods from a company you trust. Before purchasing, please check its customer reviews. With this, you will be able to purchase a better quality dip rod that will last longer.

Check price and warranty

Compare the price of immersion rods from different companies before purchasing. Make sure to check how many months of warranty or warranty it has. Therefore, if any fault occurs, it can easily be replaced. Always keep in mind that when purchasing a dip rod, prioritize its quality over its price.

Question: What things should be kept in mind when using a dip rod?

Answer: The dip rod is very easy to use. It can heat a bucket of water in 10-15 minutes. However, as easy as it is to use, it is just as dangerous. Sometimes even a little carelessness can be fatal. Therefore, it is important to keep a few things in mind when heating water with a dip rod. Understand this from the graph below.

Question: What is the best way to heat water, a geyser or an immersion rod?

Answer: Both the geyser and the dip rod have their own advantages. It depends on your need. Understand this from these points given below-

Ideal geyser to save electricity

The geyser comes with safety features such as an auto shut-off, which automatically turns off the geyser if the water overheats. While immersion rods do not have such a facility. The longer the cap is left on, the water will continue to heat up. This may result in higher power consumption.

Very low price of immersion rod

The price of the dip rod is much lower than that of the geyser. Where the price of a normal dip rod starts from Rs 200. The starting price of a geyser from a reliable company is Rs 3,000. Therefore, if the family is small and there is no It is not necessary to use a lot of hot water, the immersion rod is the best solution.

Completely portable dip rod

The dip rod is portable and can be installed anywhere in the house. This is not the case with geysers. Geyser can be installed only in one place in the house.

Geyser ideal for safety

Geysers are considered safer than dip rods because the geyser wiring is inside. The water starts heating as soon as you turn on the button. There is therefore no risk of electric shock. There is often concern about an electric shock in the immersion rod.

Geyser heats water in a very short time, but it is important to take some precautions when using it. …